Modeling Board EP 008
Main Properties
- Very lightweight with a fine surface structure.
- Easy to machine with low dust generation.
- Solvent-resistant with good heat distortion resistance.
Applications
- Design studies
- Program verification
- Substructure for close contour pastes
- Mold material for close contour casting resins
| Technical Data | |||
|---|---|---|---|
| Density | ISO 1183 | g/cm³ | 0,08 |
| Compressive Strength | ISO 604 | MPa | 0,70 |
Delivery Form
- 2500 x 1200 x 100 mm
- 2500 x 1200 x 200 mm
- 2500 x 1200 x 400 mm
Storage
The material should be stored flat and in a dry location.
Strong temperature fluctuations should be avoided during storage and transport.
Processing
Processing of the material should take place within a temperature range of 20 °C to 25 °C.
Occupational
During processing, ensure good ventilation at the workplace.
At the same time, the industrial hygiene and safety regulations of the professional association for handling reaction resins and their hardeners must be observed.
Modeling Board EP 014
Main Properties
- Very lightweight with a fine surface structure
- Easy to machine
- Low dust generation
- Solvent-resistant
Applications
- Design studies
- Program verification
- Substructure for close contour pastes
- Negative molds for casting CCC
Processing
Processing of the material should take place within a temperature range of 20 °C to 25 °C.
| Technische Daten | |||
|---|---|---|---|
| Dichte | ISO 1183 | g/cm³ | 0,14 |
| Druckfestigkeit | ISO 604 | MPa | 1,8 – 2,0 |
Delivery Form
- 2000 x 1000 x 100 mm
- 2000 x 1000 x 200 mm
- 2000 x 1000 x 400 mm
Storage
The material should be stored flat and in a dry location. Strong temperature fluctuations should be avoided during storage and transport.
Occupational Safety
During processing, ensure good ventilation at the workplace. At the same time, the industrial hygiene and safety regulations of the professional association for handling reaction resins and their hardeners must be observed.
First Aid
After inhalation: Move the affected person to fresh air.
After skin contact: Wash off dust with soap and plenty of water.
After eye contact: In case of contact with the eyes, rinse thoroughly with water. If eye irritation persists, consult a specialist.
Modeling Board EP 045, 075, 100 and 125
Transport
- Not classified as dangerous goods.
Shelf Life
- When properly stored in dry rooms at 18 to 25 °C, the board has an almost unlimited shelf life.
Processing
The board material can be machined by sawing, milling, or manually using woodworking tools (HSS) and common abrasives.
For bonding, the adhesive surfaces should be sanded and must be dry, dust-free, and grease-free.
Product Description
The modeling board EP 125 is a rigid modeling material based on polyurethane with high mechanical strength and good machinability.
The product is supplied in board format and is characterized by its density, homogeneous structure, elasticity, low expansion, and good abrasion resistance.
The modeling board EP 125 is manufactured CFC-free, contains no halogens, plasticizers, or solvents, and is physiologically harmless.
Applications
The modeling board EP 125 is ideally suited for the production of master models, copy models, and foundry patterns with particularly high mechanical stress; testing fixtures, gauges, small-series and prototype tooling, knock-out patterns, and core boxes.
Modeling Board EP 150
Product Description
The modeling board EP 150 is a rigid modeling material based on polyurethane with high mechanical strength and good machinability. The product is supplied in board format and is characterized by its density, homogeneous structure, elasticity, low expansion, and good heat resistance.
Applications
The modeling board EP 150 is ideally suited for the production of knock-out patterns, foundry models, sheet metal forming tools, and gauges.
Delivery Form
The boards are available in the following dimensions (surface sanded)
- 750 x 500 x 50 mm = 18,75 Ltr.
- 750 x 500 x 75 mm = 28,15 Ltr.
- 750 x 500 x 100 mm = 37,50 Ltr.
- 1500 x 500 x 50 mm = 37,50 Ltr.
- 1500 x 500 x 75 mm = 56,25 Ltr.
- 1500 x 500 x 100 mm = 75,00 Ltr.
Block dimensions variable upon request up to: 1000 × 1000 × 250 mm
Transport
- Not classified as dangerous goods.
Shelf Life
When properly stored in dry rooms at 18 to 25 °C, the board has an almost unlimited shelf life.
Processing
The board material can be machined by sawing, milling, or manually using woodworking tools (HSS) and common abrasives.
For bonding, the adhesive surfaces should be sanded and must be dry, dust-free, and grease-free.
Modeling Board EP 160
Product Description
The modeling board EP 160 is a rigid modeling material based on polyurethane with aluminum granulate, offering high mechanical strength and good machinability. The product is supplied in board format and is characterized by its density, homogeneous structure, and good heat distortion resistance.
Applications
The modeling board EP 160 is ideally suited for the production of knock-out patterns, gauges, flanging tools, and vacuum thermoforming molds.
Delivery Form
The boards are available in the following dimensions (surface sanded)
- 750 x 500 x 50 mm = 18,75 Ltr.
- 750 x 500 x 75 mm = 28,15 Ltr.
- 750 x 500 x 100 mm = 37,50 Ltr.
- 1500 x 500 x 50 mm = 37,50 Ltr.
- 1500 x 500 x 75 mm = 56,25 Ltr.
- 1500 x 500 x 100 mm = 75,00 Ltr.
Block dimensions variable upon request up to: 1000 × 1000 × 250 mm
Transport
- Not classified as dangerous goods.
Shelf Life
When properly stored in dry rooms at 18 to 25 °C, the board has an almost unlimited shelf life.
Processing
The board material can be machined by sawing, milling, or manually using woodworking tools (HSS) and common abrasives.
For bonding, the adhesive surfaces should be sanded and must be dry, dust-free, and grease-free.
EP 008
EP 045
EP 075
EP 100
EP 125
EP 160
